Just the spikes on both ends of the scarf started when we knitted or woven it ?? How to get it ???
5 thoughts on “How did the ears of the two ends of the knitting scarf get it?”
Ellen
The spikes on the two ends of the scarf are woven the scarf and then added. The method of making scarf spikes: 1. First determine the length of the spike you want to weave. Then fold the wool twice, that is, the approximate length of the scarf ears. Cut off the determined line, and the rear ears are cut according to the length of this wool. If you need a lot, cut it. 2, fold the wool twice, and then hook the wool over the holes on the edge of the scarf.
3, keep the wool at the middle of the hole.
4. Use your hand to put the behind -the -front wool from the front wool coil. 5, then tighten the wool. The ones can be made with two threads to make scarf ears, and choose according to your preferences. As a result, the scarf is completed.
Take the remaining wool and organize 5 cm long, all wear the head on one side of the scarf, the effect after passing is 10, and there are 10 roots of 4 cm. , A spike is done, make an appropriate amount of spike according to the width of the scarf, come on
There are many ways to weave a stream of weaving scarves, different scarves, and different ways to woven tassels. This scarf hook needle weaving: At the first needle of the scarf, hook out 11 stitches braid needles; again hook 3 needle braid needles, 1 needle long needle, 3 needle braid needle; Id hook 1 needle connection needle on the 11th stitched braid pin; continues to hook the 10 -pin braid needle; nIn the remaining tassel left by the above needle hook scarf.
The spikes on the two ends of the scarf are woven the scarf and then added.
The method of making scarf spikes:
1. First determine the length of the spike you want to weave. Then fold the wool twice, that is, the approximate length of the scarf ears. Cut off the determined line, and the rear ears are cut according to the length of this wool. If you need a lot, cut it.
2, fold the wool twice, and then hook the wool over the holes on the edge of the scarf.
3, keep the wool at the middle of the hole.
4. Use your hand to put the behind -the -front wool from the front wool coil.
5, then tighten the wool.
The ones can be made with two threads to make scarf ears, and choose according to your preferences. As a result, the scarf is completed.
Take the remaining wool and organize 5 cm long, all wear the head on one side of the scarf, the effect after passing is 10, and there are 10 roots of 4 cm. , A spike is done, make an appropriate amount of spike according to the width of the scarf, come on
There are many ways to weave a stream of weaving scarves, different scarves, and different ways to woven tassels.
This scarf hook needle weaving:
At the first needle of the scarf, hook out 11 stitches braid needles;
again hook 3 needle braid needles, 1 needle long needle, 3 needle braid needle;
Id hook 1 needle connection needle on the 11th stitched braid pin;
continues to hook the 10 -pin braid needle; nIn the remaining tassel left by the above needle hook scarf.
It was all the scarfs, and then the tie was gone.
The pig's head, I will ask.